A 32 key small board KIP32 can be used for any pedalboard.
KIP32 is a set of small boards 5 and 7 keys (6 are needed for a standard 32 keys pedalboard).
Equipped with 32 Hall effect sensors, just under the keys.
A ferrite magnet is put above, at the rear of the key. (see picture)
Directly connected to a MIDI or MIDI/USB board.
Can be adapted to any keyboard, by groups of 5 and 7 keys.
The KI7_MIDI_USB can process :
KIP32 is a set of small boards 5 and 7 keys (6 are needed for a standard 32 keys pedalboard).
Equipped with 32 Hall effect sensors, just under the keys.
A ferrite magnet is put above, at the rear of the key. (see picture)
Directly connected to a MIDI or MIDI/USB board.
Can be adapted to any keyboard, by groups of 5 and 7 keys.
The KI7_MIDI_USB can process :
- Up to 7 keyboards/pedalboard:Drawknobs
- 64 power outputs : leds, drawknobs.
- Extensible to any configuration.
PEDUSB Board : directly connect the small KIP32 boards to USB/MIDI output
KI7_MIDI_USB : can be connected via a KI64
KI6x8x8 MIDI_USB can be connected via his 64 digital inputs.
- Example at the right : KI7_MIDI_USB for 7 keyboards/pedals. Here, only one keyboard is connected.
- At the bottom, standard connector DIN 41612 64 contacts for : registers, pistons, knobs.
- Input 5V or 12Volts (for regulated 5V) in the case of multiple manuals with sensor boards KIH32
- Standard MIDI out connector.
- No need for "MIDI MERGERSs.
- Any configuration upon request.
- Available upon request.
